Acoustic Colored Wood Panels
This product is not available at the moment, but will be joining our catalogue of products soon.
This product is currently out of stock, enter your email below and we’ll notify you when it’s back in stock.
Get notified when it’s back in stock
1. Gluing straight onto the wall
A construction glue or grab adhesive is recommended
for this.
2. Screwing directly into the wall
By using black screws for the black backing option or
silver or grey screws for the grey-backed option, the
panels can be screwed directly into the wall through the
acoustic felt.
We recommend a minimum of 9 screws per panel at
200mm intervals across the width and 800mm down the
length of the panel.
If installing into ceilings, then make sure they are
screwed into ceiling joists.
Please make sure the correct fixings are used if going
into plasterboard, for example.
3. Screwing the panels into 45mm timber batons
We recommend screwing 45mm timber batons to the
wall and then screwing the panels directly into the
batons through the acoustic felt to achieve optimum
sound absorption.
Combined with Rockwool sound insulation behind the
panels in between the batons, this will achieve Class A
sound absorption.
We aim to despatch all in-stock products within 24 hours from our warehouse. All products are dispatched from within the EU. No customs / import charges will apply. We’ll send you an email when the order is dispatched, and our courier will send you full tracking details.
Delivery Cost
Netherlands - Free shipping on all panels
France - €49,99
Belgium - €59,99
Luxemburg - €99,99
Overview
With Acupanel®’s range of ready-made acoustic colour panelling, you can make any wall a work of art. Made from high-quality luxury laminate that’s been carefully chosen for its high-end look and feel, all our slatted wall panels are cut and oiled by hand in our workshop. And with each panel pre-bonded to a rigid recycled felt backing, Acupanel® promises soundproofing that’s second to none. All panels measure 60cm in width and 240cm in length - the standard ceiling height. So all that’s left to do is trim to fit the space and screw it directly into your wall.
Share your style
Tag @acupanel on Instagram, and we'll choose our favourites to feature.
Coverage calculator
Tell us the measurements of the space you'd like to cover and we'll calculate the number of panels needed for your project.
To cover a space of
x
, you will need
Each panel measures
x
-
in total.
Customers also viewed
Enhance the colour and grain of the wood with a luxury hand-oiled finish.
The beauty of natural wood is that every log cut is unique. Each colour and grain pattern you see will be different to every other tree in the world, making wood one of the fascinating materials on the planet. The only way to make the wood more stunning is to add a finish. We offer a finishing service that applies a high-quality luxury satin oil to the wood, enhancing the colour and grain, making it even more striking than it already is.
Add an oiled finishYour Acupanel® questions: answered
The acoustic wood panel range comes in panels measuring 240cm x 60cm.
We have designed the panels to join width-ways and long ways seamlessly so any length or width can easily be achieved.
If you want a class A sound absorption, we recommend installing the panels with batons. However, if you're going to have them for decorative purposes while still providing sound absorption, we recommend screwing the panels directly into the wall through the acoustic felt backing using black or grey screws, depending on your choice of backing.
We do not currently offer the panels in custom sizes; however, we have designed them to be easily cut if you need smaller or they can be joined if you need to cover larger areas
The panels will be absolutely fine in these areas as long as they are not in direct contact with water, although we recommend applying a water-resistant finish to the front of the slats to protect them against any moisture or humidity.
The acoustic slat wood wall panel range is designed for indoor use only.
The acoustic panels come with an option of unfinished or oiled finished. Unfinished allows you to finish it any way you choose. We recommend adding a finish, whether it's an oil, wax, lacquer, or varnish, to protect the wood, and while doing so, it also enhances the grain and colours of the wood. Our finished panels come with a protective satin oil applied which will increase the richness and warmth of the wood.
It is straightforward to adjust the panels to fit around any object. You can cut the slats' widthways with a saw, and the felt lengthways with a sharp blade to apply around any item you may have on your surface.
You can mount the panels on all surfaces, including brick, concrete, and plasterboard.
The wood used is always from the same source, so they will always look more or less the same. It is natural wood, however, so knots, slight cracks, and colour variations can occur.
The panels have been designed to have the edge exposed. When cutting through the slats they are black throughout so an edge will always look like the rest of the panels. Alternatively, we also offer an end trim available in the accessories section.
You certainly can.
The felt acoustic backing is fire-rated. However, the face materials are not. Please get in touch with us for more information.
If installing with batons, you can use mineral wool or other sound insulation material in-between the gaps, increasing the sound absorption properties even further.
Yes, you can purchase a custom sample box from the navigation above.
Our team is on hand from Monday to Friday, 9am - 5pm, to answer any questions. Give us a call on 01525 851166 or email us.
Get in touchCan’t decide which panel is right for you?
We sell 12cm x 30cm samples of our full Acupanel® range. Order as few or as many as you like - we’ll just take the value of your sample box off your final Acupanel® purchase.