Panel End Piece Trim
The Acupanel® end piece trims are the perfect addition to finishing your project. The end pieces can be applied seamlessly to the full panels' end to give you a solid wood edge look. Whilst some prefer to have exposed black edges, others like to have matching wood on the sides. Please be aware that the end pieces can sometimes arrive with a slight bend, which is common when veneering a product on one side. We recommend using construction glue, working up from the bottom or top, and straightening them as you go up or down. With strong construction glues, it will then hold the end piece straight in place.
We recommend using construction glue, working up from the bottom or top, and straightening them as you go up or down.
We aim to despatch all in-stock products within 48 hours. We’ll send you an email when the order is despatched, and our courier will send you full tracking details.
Tell us the measurements of the space you'd like to cover and we'll calculate the number of panels needed for your project.
To cover a space of
you will need
Each panel measures x - in total.
Out-of-the-box wall panelling that not only looks good, but does good
Recycled acoustic felt
Our acoustic felt can offer class A sound absorption - ideal for keeping noise reverberation to a minimum or simply creating a quieter, more comfortable space to relax.
Sustainably sourced MDF
We’re committed to protecting the forests that supply our wood. Our MDF slats are made using materials that come entirely from sources that we know and trust.
Luxury wood veneer finish
With over five decades of wood veneer supply and veneered product development, we only source the best possible wood for our acoustic slat panels.
Enhance the colour and grain of the wood with a luxury hand-oiled finish.
The beauty of natural wood is that every log cut is unique. Each colour and grain pattern you see will be different to every other tree in the world, making wood one of the fascinating materials on the planet. The only way to make the wood more stunning is to add a finish. We offer a finishing service that applies a high-quality luxury satin oil to the wood, enhancing the colour and grain, making it even more striking than it already is.Add an oiled finish
Your Acupanel® questions: answered
The acoustic wood panel range comes in panels measuring 240cm x 60cm.
We have designed the panels to join width-ways and long ways seamlessly so any length or width can easily be achieved.
If you want a class A sound absorption, we recommend installing the panels with batons. However, if you're going to have them for decorative purposes while still providing sound absorption, we recommend screwing the panels directly into the wall through the acoustic felt backing using black or grey screws, depending on your choice of backing.
We do not currently offer the panels in custom sizes; however, we have designed them to be easily cut if you need smaller or they can be joined if you need to cover larger areas
The panels will be absolutely fine in these areas as long as they are not in direct contact with water, although we recommend applying a water-resistant finish to the front of the slats to protect them against any moisture or humidity.
The acoustic slat wood wall panel range is designed for indoor use only.
The acoustic panels come with an option of unfinished or oiled finished. Unfinished allows you to finish it any way you choose. We recommend adding a finish, whether it's an oil, wax, lacquer, or varnish, to protect the wood, and while doing so, it also enhances the grain and colours of the wood. Our finished panels come with a protective satin oil applied which will increase the richness and warmth of the wood.
It is straightforward to adjust the panels to fit around any object. You can cut the slats' widthways with a saw, and the felt lengthways with a sharp blade to apply around any item you may have on your surface.
You can mount the panels on all surfaces, including brick, concrete, and plasterboard.
The wood used is always from the same source, so they will always look more or less the same. It is natural wood, however, so knots, slight cracks, and colour variations can occur.
The panels have been designed to have the edge exposed. When cutting through the slats they are black throughout so an edge will always look like the rest of the panels. Alternatively, we also offer an end trim available in the accessories section.
You certainly can.
The felt acoustic backing is fire-rated. However, the face materials are not. Please get in touch with us for more information.
If installing with batons, you can use mineral wool or other sound insulation material in-between the gaps, increasing the sound absorption properties even further.
Yes, you can purchase a custom sample box from the navigation above.
Our team is on hand from Monday to Friday, 9am - 5pm, to answer any questions.Get in touch
Can’t decide which panel is right for you?
We sell 12cm x 30cm samples of our full Acupanel® range. Order as few or as many as you like - we’ll just take the value of your sample box off your final Acupanel® purchase.